1. Before You Start Package Contents TK-802R Multi-Language Quick Installation Guide Daisy-Chain Cable Rack mount kit AC Power Adapter (9V DC, 1A) System Requirements PS/2 Keyboard PS/2 Mouse VGA Compatible Monitor PS/2 KVM cables (e.g. TK-C06, TK-C10, TK-C15) Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux and Netware...
2. How to Install 1. Turn OFF all computers and their peripherals, and then disconnect all power cords. 2. Connect the shared PS/2 keyboard, monitor, and PS/2 mouse to the KVM switch's Console Port. 3. Connect the included AC Power Adapter to the KVM switch and then to a power outlet.
Page 5
Daisy-Chain Note: 1. Must use the daisy chain cable provided with the KVM switch 2. Only daisy chain the KVM switch with another TK-802R 3. Stackable up to 16 KVM switches 6. Connect one end of the daisy-chain to the Daisy chain in port on the first (master) KVM switch.
Your installation is now complete. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register register your product Online at: Thank you for choosing TRENDnet.
3. Operation Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands. LED Indicators Bank Number: Indicates the number or sequence of the switch when daisy chained. This number is 01 when the switch is not daisy chained. Red LED light: KVM cable is connected and PC is powering the KVM switch.
Page 8
Hot Key Commands A keyboard hot key command consists of at least three keystrokes: Hot Key command = Scroll Lock + Scroll Lock + Command key(s) After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key again.
Page 9
On Screen Display (OSD) Control To activate the OSD Menu, use the following hot-key command: Scroll Lock Scroll Lock + Space Bar Note: For detailed information about the operation of the OSD, please refer the Quick Referece Sheet.
Page 10
Quick Reference Sheet for TK-802R Hot Keys Front-panel Description Command Select the active bank Use arrow keys to Press Push Button Scroll Lock Scroll Lock + A + B + Y + Z (switch) and channel Select PC select and then for a specific port (ab) = bank number (computer)
You can switch computers by pressing the Push Buttons on the KVM switch or using the Hot Key commands. Go to Section 3 Operation for more information. If you still encounter problems or have any questions regarding the TK-802R, please contact TRENDnet's Technical Support Department.
Page 12
TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment.
Page 13
Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt...
Page 14
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.