TRENDnet TK-802R Quick Installation Manual page 8

Hot Key Commands
A keyboard hot key command consists of at least three keystrokes:
Hot Key command = Scroll Lock +
After pressing the Scroll Lock
again. You then have another 2 seconds to press a command key. A beep confirms that
the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the
switch will exit hot key mode.
To select a specific PC port
Scroll Lock
Select PC =
For example, to select port 1, hit the following key sequence:
Select PC = Scroll Lock
For example, to select port 8 of the 10 KVM switch on a series of daisy chained
TK-802R's you hit the following key sequence:
Scroll Lock
Select PC =
Note: When using the KVM switch standalone, type in 0 + 1 for the bank number.
For a list of all the Hot Key commands, please see the Quick Reference Sheet.
Scroll Lock
key, you have 2 seconds to press the Scroll Lock key
+ Scroll Lock +
+ Scroll Lock +
th
Scroll Lock +
+
6
+ Command key(s)
A + B + Y + Z
Bank number
0 + 1 + 0 + 1
1 + 0 + 0 + 8
Port number