Rack Mount; Register Your Product - TRENDnet TK-802R Quick Installation Manual

Hide thumbs Also See for TK-802R:

Note: DO NOT PRESS the port 1 button for 3 seconds or longer on any slave switch

because this will initialize only the switches downstream from this slave switch.

10. Turn ON the connected computers one-by-

one and wait until each computer's desktop

appears.

Rack Mount

The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which can be

placed in a wiring closet with other equipment.

Note: If you would like to mount the KVM switch to a EIA 19" equipment rack, install the

included mounting brackets to the sides of the KVM switch, secure them with the screws

provided, and then mount the KVM switch to the equipment rack with the hardware

provided by the equipment rack manufacturer.

11. Attach the mounting brackets to both sides of

the switch and secure them with the provided

screws.

12. Carefully position the switch onto the rack.

Align the bracket to the screw holes on the

rack, then use the screws provided with the

equipment rack to mount the switch.

Your installation is now complete.

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet.

www.trendnet.com/register

Table of Contents