Denon AVR-1612 Owner's Manual page 72

Setting items
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
message "Return settings to the default?"
is displayed. Select "Yes" or "No", and then
ENTER
press
Video
Set the source video.
Setting items
Video Select SOURCE : Play the picture and sound of the input source.
Video of another input DVD / SAT/CBL / V.AUX / DOCK : Select video input source to view. This
source is played back
can be set for individual input sources.
combined with the playing
NOTE
audio.
• It is not possible to select HDMI input signals.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 63) cannot be selected.
Video Mode Auto : Process video automatically based on the HDMI content
Make settings for video information.
processing. Game : Always process video appropriate for game content.
Movie : Process video normally.
DVD SAT/CBL
If "Video Mode" is set to "Auto", the mode is switched according to
V.AUX DOCK
the input contents.
BD
Setting details
ENTER
, the
.
Default settings are underlined.
Setting details
Input Mode (Audio)
The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
It is normally recommended
to set the audio input mode
• "HDMI" can be set for input sources for which "HDMI" is assigned at
to "Auto".
"Input Assign" (vpage 68).
• "Digital" can be set for input sources for which "Digital" is assigned at
"Input Assign" (vpage 68).
• If the input source is set to "TV" or "GAME", it cannot be set to
"Analog".
• When digital signals are properly input, the
the display. If the
connector assignment and the connections.
• If "HDMI Control" is set to "ON" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
Decode Mode Auto : Detect type of digital input signal and decode and play automatically.
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source. DTS : Decode and play only DTS input signals.
BD DVD TV
• This item can be set for input sources for which "HDMI" or "Digital" is
SAT/CBL GAME
assigned at "Input Assign" (vpage 68).
V.AUX DOCK
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
69
Input Setup
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check the digital input