Playing A Blu-Ray Disc Player/Dvd Player; Adjusting The Master Volume; Turning Off The Sound Temporarily - Denon AVR-1612 Owner's Manual

Adjusting the master volume

M df
Use to adjust the volume.
n When the "Volume Display" setting
(vpage 63) is "Relative"
GAdjustable rangeH
– – – –80.5dB – 18.0dB
n When the "Volume Display" setting (vpage 63) is
"Absolute"
GAdjustable rangeH 0.0 – 99.0
• The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit. In this case, perform the
following operations.
MASTER VOLUME
Turn to adjust the volume.
BD

Turning off the sound temporarily

Press N .
• The power indicator flashes green.
• "MUTE" indicator on the display lights.
appears on a TV screen.
•
• The sound is reduced to the level set at "Mute Level" (vpage 63).
N
• To cancel, press again. Muting can also be canceled by adjusting
the master volume.
19
Important information
Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
Press ON to turn on power to the
unit.
3
BD
Press
player used for playback.
4
Play the device connected to this unit.
Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
DVD
or to switch an input source for a