Removing The Handle; Replacing The Handle - Dell Latitude E6400 XFR Service Manual

36.1 Removing the Handle

CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the procedures in Before Working on Your Computer.
2. Remove the six M2.5 x 8-mm screws from the front of the palm rest.
3. Turn the system over and remove the four M2.5 x 8-mm palm rest retainer screws.
4. Place a scribe against the handle socket on the side, press in 1 inch and rotate to the front to lift the palm rest
area slightly.
5. Remove the carry handle from the sockets and slide out of the notebook.

36.2 Replacing the Handle

1. Insert the carry handle pinion into the sockets on the base of the notebook.
Page 65
™
Dell Latitude™ E6400 XFR Service Manual
1 Handle pinion
1
2
2 Tab socket