Wi-Fi Sniffer Card; Removing The Wi-Fi Sniffer Card - Dell Latitude E6400 XFR Service Manual

3. Route the SIM extension cable and reconnect the SIM extension board into the original SIM slot located in the
battery bay.
4. Install the Wi-Fi sniffer cable to the system board.
5. Replace the palm rest, keyboard, palm rest overlay, led cover, display assembly, LCD cable channel covers
and bottom access panel (see Replacing the Palm Rest).
6. Follow the procedures in After Working on Your Computer.

30 Wi-Fi Sniffer Card

30.1 Removing the Wi-Fi Sniffer Card

1. Follow the procedures in Before Working on Your Computer.
2. Remove the bottom access panel, LCD cable channel covers, display assembly, led cover, palm rest overlay,
keyboard and palm rest (see Removing the Palm Rest).
3. Detach the Wi-Fi Sniffer cable from the motherboard.
4. Remove the M2 x 3-mm screw from the modem.
5. Detach the modem, and then rotate the modem and RJ-11 cable out of the way.
6. Remove the sniffer card by removing the two M2.5 x 5-mm screws that secure the card to its bracket.
Page 60
™
Dell Latitude™ E6400 XFR Service Manual
1
1 Wi-Fi Sniffer cable connection to motherboard