Replacing The Bottom Access Panel - Dell Latitude E6400 XFR Service Manual

NOTE: No snaps are used to attach the bottom access panel to the base. There is a gasket
attached to the perimeter of the bottom access panel, and this gasket might provide some
resistance during removal.
1

4.2 Replacing the Bottom Access Panel

1. Position the Bottom Access Panel into place.
NOTE: Ensure the battery release slider latches on the bottom access panel are in their locked
positions. See photo below for correct slider latches positions.
1. Replace and tighten the twenty-one M2.5 x 5-mm screws in the sequence identified below.
Page 23
™
Dell Latitude™ E6400 XFR Service Manual
1 M2.5 x 5mm screws (21)
3 Battery release slider latches (2)
Battery release latches in locked position
3
2 Bottom of computer
2