D-Link DI-804 Quick Install Manual page 4

2 2
Installing the DI-804 using the Setup Installing the DI-804 using the Setup
Wizard Wizard
The default IP address of the LAN
port is set to 192.168.0.1.
Click Next to accept the default set-
tings.
By default, the WAN port is set to
automatically obtain an IP address
from the ISP.
To assign a static IP for the WAN
port, remove the checkmark and
enter the settings.
Click Next.
DSL users:
If you are using a PPPoE client to
connect to your DSL provider,
then place a checkmark on the first
box, and enter the user name and
password in the appropriate box.
Cable modem users:
If you are using a cable modem,
then place a checkmark on the sec-
ond box and enter the host and
domain name given by your cable
provider.
Click Next.
continued continued