D-Link DI-804 Quick Install Manual page 2

Connecting the DI-804 Broadband Router Connecting the DI-804 Broadband Router
1 1
to your network to your network
Next, connect the WAN port to the
Cable/DSL modem. The WAN LED
will indicate connection.
Finally, connect the computer to one
of the LAN ports on the DI-804.
2 2
Installing the DI-804 using the Setup Installing the DI-804 using the Setup
Wizard Wizard
Checking the IP Address of the computer being
used to configure the DI-804 Broadband Router
Go to Start>Run
Type in "WINIPCFG".
The IP address of the computer must
be between 192.168.0.2 and
192.168.0.254 in order to configure
the router.
Click on the "Release All" and then
on the "Renew All" button to obtain
an IP address from the broadband
router between 192.168.0.100. and
192.168.0.199.
Note: If you are manually assigning a
static IP, please refer to Appendix A.
continued continued