Administrator Settings; Change Password; Remote Management - D-Link DIR-330 User Manual

Secton 3 - Configuraton
This page will allow you to change the Administrator password. You can also enable Remote Management.
Admin Password:
Enter a new password for the administrator
login. Only the administrator can make changes
to the settings.
Enable Remote
Remote management allows the router to be
Management:
configured from the Internet by a web browser.
A username and password is still required
to access the Web-Management interface.
In general, only a member of your network
can browse the built-in web pages to perform
Administrator tasks. This feature enables you
to perform Administrator tasks from the remote
(Internet) host.
IP Address:
Enter the IP address of the remote computer.
You may enter * to allow a connection from any
Internet address.
Port:
The port number used to access the DIR-330.
Example: http://x.x.x.x:8080 whereas x.x.x.x
is the Internet IP address of the DIR-330 and
8080 is the port used for the Web Management
interface. The schedule may be set to Always,
which will allow the filter to always be enabled. You
can create your own times in the Maintenance
> Schedules section.
D-Lnk DIR-330 User Manual

Administrator Settings