Statically Assign An Ip Address - D-Link DIR-330 User Manual

Appendx B - Networkng Bascs

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below:
Windows XP/2000 Users
®
• Windows XP - Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network Connections
®
icon.
Windows 2000 – From the desktop, right-click My Network Places > Properties.
®
• Right-click on the Local Area Connection which represents your D-Link network adapter (or other adapter) which will be connected
to your router.
• Highlight Internet Protocol (TCP/IP) and click Properties.
• Click Use the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on
your router.
Example: If the router's LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not in
use on the network.
• Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
• Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).
• The Secondary DNS is optional (you may enter a DNS server from your ISP).
• Click OK to save your settings.
D-Lnk DIR-330 User Manual