Wireless Network Settings - D-Link DIR-330 User Manual

Secton 3 - Configuraton
Enable Wirelss: Check the box to enable the wireless connection. If
you do not want to use wireless, uncheck the box
to disable the wireless connection.
Wireless Network The name of your wireless network is also called the
Name:
Service Set Identifier (SSID). Create a name using
up to 32 characters. The SSID is case-sensitive.
Wireless Channel: Indicates the channel setting for the router. The
channel can be changed to fit the channel setting
of an existing wireless network or to customize the
wireless network. If you enable Auto Channel Scan,
this option will be grayed out.
Enable Auto Channel The Enable Auto Channel Scan setting can be
Selection:
selected to allow the router to choose the channel
with least amount of interference. This feature is
enabled by default.
802.11 Mode:
Select one of the following:
• 802.11b only – Select if all of your wireless
clients are 802.11b.
• 802.11b/g mixed – Select if you are using both
802.11b and 802.11g wireless clients.
• 802.11g only – Select if all of your wireless
clients are 802.11g.
Enable Hidden
Check the box if you do not want the SSID of your wireless network to be broadcasted by the router. If the box is checked,
Wireless:
the SSID will not be seen by site survey utilities so your wireless clients must manually enter the SSID to connect to the
router.
Wireless Security
Mode:
Refer to page 62 for more information regarding wireless security.
D-Lnk DIR-330 User Manual

Wireless Network Settings