Static Ip; D-LNk Dir-330 User Manual - D-Link DIR-330 User Manual

Secton 3 - Configuraton
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address,
subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
ISP Gateway:
Enter the Gateway assigned by your ISP.
MAC Address:
The default MAC Address is set to the Internet port's
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone MAC Address button to
replace the Internet port's MAC address with the
MAC address of your Ethernet card.
DNS Servers:
The DNS server information will be supplied by your
ISP (Internet Service Provider.)
MTU:
You may need to change the MTU (Maximum
Transmission Unit) for optimal performance with your
specific ISP. 1500 is the default MTU.

D-Lnk DIR-330 User Manual

Internet Setup

Static IP