Connect To A Wireless Network; Using Windows ® Xp - D-Link Xtreme N Duo DAP-1522 User Manual

Section 5 - Connecting to a Wireless Network
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for
®
Service Pack 2 users. If you are using another company's utility or Windows
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option
similar to the Windows
®
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal, but cannot access the Internet,
check you TCP/IP settings for your wireless adapter. Refer
to the Networking Basics section in this manual for more
information.
D-Link DAP-15 User Manual

Connect to a Wireless Network

Using Windows
XP utility as seen below.
or
XP
®
2000, please refer to the user manual
®
0