Connect Your Network Camera(S); Getting Started - D-Link DNR-2020-04P Quick Installation Manual

6. Re-attach the top cover by sliding it over the
device. Re-insert the screw in the rear of the
cover to secure it.

Connect Your Network Camera(s)

You can connect PoE network cameras directly to
your DNR-2020-04P.
Note: The total PoE budget is 45 watts.
1. Connect a CAT5 UTP cable to a port marked
either P1, P2, P3, or P4.
2. Connect the other end of the cable to your PoE
Camera.
Connect Your Monitor (Optional)
You can set up your NVR without using a PC by
connecting a VGA or HDMI display to the respective
ports on the back of the device. To control the GUI,
connect a USB mouse to the USB port on the front
panel.
Type admin in the User Name box using the
virtual keyboard and leave the password blank,
then hit Enter.
Once you are on the home screen, click on the
icon to start the setup wizard. Select a language
and click Start to proceed with configuration.
Configuration
Power On
Connect the power adapter, then, switch the NVR
on and ensure the power LED on the front of the
unit is lit.

Getting Started

1. Make sure the NVR is connected to a network
via a router or a switch, or directly connected
to a PC.
2. Insert the DNR-2020-04P CD into the CD-ROM
drive. If the CD Autorun function does not
automatically start on your computer, go to
Start > Run. In the Run box, type D:\autorun.
exe (where D: represents the drive letter of
your CD-ROM drive) and click OK. When the
autorun screen appears, click NVR Search
Utility.
D-Link JustConnect 16-Channel PoE Network Video Recorder  3