System - D-Link Xtreme N Duo DAP-1522 User Manual

Section  - Configuration
Save To
Use this option to save the current access point
Local Hard configuration settings to a file on the hard disk of
Drive: the computer you are using. First, click the Save
button. You will then see a file dialog, where you can
select a location and file name for the settings.
Load From
Use this option to load previously saved access
Local Hard point configuration settings. First, use the Browse
Drive:
control to find a previously save file of configuration
settings. Then, click the Load button to transfer
those settings to the access point.
Restore
This option will restore all configuration settings
To Factory back to the settings that were in effect at the time
Default:
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Reboot The Click to reboot the bridge.
Device:
Clear
Click to clear the language pack. This will put the web UI back to English.
Language
Pack:
D-Link DAP-15 User Manual

System