Configuration; Easy Search Utility - D-Link ShareCenter Pro 1200 User Manual

Section 3 - Configuration
When first powered on, during the initial boot sequence, the ShareCenter Pro will wait to be assigned an IP address via DHCP.
If it does not receive a DHCP assigned IP address, by default it will have a self-assigned IP address in the range of 169.254.0.0
to 169.254.255.255. It is recommended to use the included D-Link Easy Search Utility when accessing and configuring the
ShareCenter Pro for the first time. If you want to change the IP address before logging in or are unable to connect to the
ShareCenter Pro IP address, you can use the Easy Search Utility provided on the product CD to locate the device on your network
and make any needed changes.
Network The Easy Search Utility displays any ShareCenter Pro
Storage Device devices it detects on the network here.
Refresh Click Refresh to refresh the device list.
Click Configuration to access the Web based configuration

Configuration

of the ShareCenter Pro
LAN Configure the LAN Settings for the ShareCenter Pro here.
Apply Click Apply to save changes to the LAN Settings.
iSCSI Drive Displays the available iSCSI targets on ShareCenter Pro.
Mapping
Connect Click Connect to connect to the iSCSI target.
Management Click Management to edit the information.
Drive Mapping
Volumes available for mapping are displayed here.
Available Drive Choose an available drive letter. Click Connect to map
Letters the selected volume. Click Disconnect to disconnect the
selected mapped volume.
Click About to view the software version of the Easy Search
About
Utility.
Exit Click Exit to close the utility.
D-Link ShareCenter Pro 1200-05 User Manual
Configuration

Easy Search Utility

12