Installation; Before You Begin - D-Link Xtreme N Duo DAP-1522 User Manual

Wireless bridge
Hide thumbs Also See for Xtreme N Duo DAP-1522:
Table of Contents

Advertisement

Section  - Installation

Installation

This section will walk you through the installation process. Placement of the DAP-1522 is very important. Do not place
the DAP-1522 in an enclosed area such as a closet, cabinet, or in the attic or garage.

Before you Begin

Please configure the Wireless Bridge with the computer that was last connected directly to your modem. Also, you can
only use the Ethernet port on your modem. If you were using the USB connection before using the Wireless Bridge,
then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port
on the Wireless Bridge, and then turn the modem back on. In some cases, you may need to call your ISP to change
connection types (USB to Ethernet).
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as
WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.
D-Link DAP-15 User Manual


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents