Installing The Dcs-950 Behind A Router; Single Camera Installation; Multiple Camera Installation - D-Link SECURICAM Network DCS-950 User Manual

DCS-950 User's Manual
Installing the DCS-950 Behind a
Router

Single Camera Installation

If you are installing a single camera on your network the installation is an easy 4–step
procedure:
1) Identify Your Camera on the Network
2) Assign a Local IP Address for Your Camera
3) Determine Your Router's WAN IP Address (Enable Remote Viewing)
4) Open Virtual Server Ports for Your Router (Enable Remote Viewing)

Multiple Camera Installation

If you are installing multiple cameras on your network, the installation is an easy 5-step
procedure:
1) Identify Your Camera on the Network
2) Assign a Local IP Address for Your Camera
3) Open a Second Port on the Camera
4) Determine Your Router's WAN IP Address (Enable Remote Viewing)
5) Open Virtual Server Ports for Your Router (Enable Remote Viewing)
D-Link Systems, Inc.

Installing the DCS-950 Behind a Router

39