Status; Device Info - D-Link SECURICAM Network DCS-950 User Manual

DCS-950 User's Manual
AV Control Port:
AV Streaming Port:

Status

The Status tab provides the following configuration option: Device Info.

Device Info

D-Link Systems, Inc.
Note: You MUST also set up your router/gateway for Port
Mapping; this will enable remote viewing of your camera via
the Internet. Please refer to your router's instruction manual on
how to open up ports. For additional help on configuring your
camera to work with your router, please refer to the next section
on setting up your camera for use with a router. For installing
multiple cameras, ONE port per camera must be opened on
your router, the Web server (HTTP) port.
This is the port that allows the user to connect to synchronize
the camera's audio and video. By default the port is set to 5000.
You may change the port number if using multiple cameras.
This is the port used to stream video. By default the port is set
to 5001. You may change the port number if using multiple
cameras.
Status > Device Info
Using the Configuration Menu
37