Installing The Dcs-950G Behind A Router; Single Camera Installation; Multiple Camera Installation - D-Link DCS-950G User Manual

Installing the DCS-950G Behind a Router

Single Camera Installation

If you are installing a single camera on your network the installation is an easy 4–step procedure:
1) Identify Your Camera on the Network
2) Assign a Local IP Address for Your Camera
3) Determine Your Router's WAN IP Address (Enable Remote Viewing)
4) Open Virtual Server Ports for Your Router (Enable Remote Viewing)

Multiple Camera Installation

If you are installing multiple cameras on your network, the installation is an easy 5-step procedure:
1) Identify Your Camera on the Network
2) Assign a Local IP Address for Your Camera
3) Open a Second Port on the Camera
4) Determine Your Router's WAN IP Address (Enable Remote Viewing)
5) Open Virtual Server Ports for Your Router (Enable Remote Viewing)
73