Time / Date - Clover CDR-1610 User Manual

3.3 Time / Date

▪ Click the "TIME / DATE" button on the Setup Window, it will show the Time / Date Setup
Window.
▪ Click the "EXIT" button on the Time / Date Setup Window, it will return to the Setup
Window.
■ Time Format
▪ Click the "TIME FORMAT" button, and then change the Time Format by using the mouse
wheel or "UP/DOWN" key on the front panel.
▪ Time Format is selectable by 12 hour or 24 hour mode.
■ Time Setting
▪ Click "STOP RECORD" in the MAIN menu before setting the Time.
▪ Click the "Hour" button, and then set the Hour by using the mouse wheel or
"UP/DOWN" key on the front panel. After setting the Hour, click the "Hour" button again
for confirmation.
▪ How to set the "Minute" and "Second" are the same as above.
Figure 3-14: Time/Date Setup Window
Figure 3-15: Time Format
Figure 3-16: Time Setting
- 40 -