Cisco SRP521W Administration Manual page 97

5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
97
Click Network Setup on the tab and then click PPPoE Relay in the navigation pane.
The PPPoE Relay page appears.
Click Add Entry. The PPPoE Relay page opens.
Choose a WAN option.
Choose a LAN option.
To enable the PPPoE Relay feature for the Internet side, click Enabled.
Click Submit to save your settings.
Field
WAN option
Lan option
PPPoE Relay Status
Description
The WAN interface option.
The LAN interface option.
To enable the PPPoE Relay feature for the Internet side,
select Enabled. The default setting is Disabled.
Services Ready Platform SRP 500 Series Administration Guide
Configuring the Network
PPPoE Relay