Advanced Wireless Settings - Cisco SRP521W Administration Manual

4
NOTE
STEP 1
STEP 2
STEP 3
71
Field
Access Restriction
Prevent
Permit
Show Client List
MAC Address Table
01-32

Advanced Wireless Settings

This feature is used to set up the advanced wireless functions of the Services
Ready Platform. These settings should be adjusted only by an expert
administrator; incorrect settings can reduce wireless performance.
To change these settings, wireless must first be enabled.
Click Interface Setup on the tab and then click WiFi Setting in the navigation pane.
Click Advanced Wireless Settings. The Advanced Wireless page appears.
From the Select a SSID menu, choose the beacon interval and RTS threshold
settings to apply to the SSID.
Enter a value in the RTS Threshold field. If you encounter inconsistent data flow,
enter only minor reductions. The default value of 2346 is recommended.
Setting up the Interfaces of the Services Ready Platform
Description
Select this option to prevent devices with the MAC
address in the table from accessing the wireless
network. This button is selected by default.
Select this option to allow devices with the MAC
address in the table to access the wireless network.
This button is not selected by default.
This button give you access to the Wireless Client List
page. This page shows computers and other devices on
the wireless network. The list can be sorted by Client
Name, Interface, IP Address, MAC Address, and Status.
The MAC addresses of the devices whose wireless
access you want to block or allow.
Services Ready Platform SRP 500 Series Administration Guide
Setting up the Wireless LAN