Cdp Setting - Cisco SRP521W Administration Manual

Configuring the Network

CDP Setting

CDP Setting
STEP 1
STEP 2
STEP 3
STEP 4
Services Ready Platform SRP 500 Series Administration Guide
Field
UPnP
Allow Users to
Configure
Keep UPnP
Configurations After
System Reboot
Allow Users to
Disable Internet
Access
Cisco Discovery Protocol (CDP) is a feature that enables network administrators to
access a summary of protocol and address information about other devices that
are directly connected to the device initiating the command.
Click Network Setup on the tab and then click CDP Setting in the navigation pane.
The CDP Setting page appears.
Select CDP options.
Select CDP Setting per Ethernet port.
Click Submit to save your settings.
Description
If you want to use UPnP, use the default setting, Enabled.
Otherwise, select Disabled.
If you do not want to be able to make manual changes to
the Services Ready Platform while using the UPnP
feature, select Disabled. Otherwise, use the default
setting, Enabled.
This choice will decide to save UPnP configuration after
system reboot. The default is disabled.
If you want to be able to prohibit any and all Internet
connections, select Enabled. Otherwise, use the default
setting, Disabled.
5
106