Remote Provisioning - Cisco SRP521W Administration Manual

The Quick Setup Menu
Basic Configuration Setup
STEP 1
STEP 2
STEP 3
STEP 4
Services Ready Platform SRP 500 Series Administration Guide
Field
Edit (continued)
Edit (continued)

Remote Provisioning

This feature lets you configure communication with an Access Control Server
(ACS) via TR-069 CPE WAN Management Protocol (CWMP).
Click Quick Setup on the tab and then click Remote Provisioning in the navigation
pane. The Remote Provisioning page appears.
Click Enabled to enable remote provisioning.
Enter the URL for ACS. The format should be http(s)://xxx.xxx.xxx.xxx:port or
xxx.xxx.xxx.xxx:port. The xxx.xxx.xxx.xxx is domain name or IP of ACS server;
and after ":" is port. Both IP and port must be filled.
Enter the ACS username and password.
Description
• WPA2 Enterprise—This option features WPA2
used in coordination with a RADIUS server. (This
should only be used when a RADIUS server is
connected to the Router.)
- WPA Algorithms—Select the algorithm(s) you
want to use, AES or TKIP + AES. (AES is a
stronger encryption method than TKIP.)
- RADIUS Server Address (Primary and
Secondary)—Enter the IP address of your
RADIUS server.
- RADIUS Port—Enter the port number of your
RADIUS server.
- Shared Secret—Enter the key shared by the
Router and RADIUS server. The key can
include 8 to 63 ASCII characters or 64
hexadecimal characters.
- Key Renewal Timeout—Enter the Key
Renewal period, which tells the Router how
often it should change encryption keys.
Disabled—No security is set for the SSID. This option is
not recommended by Cisco.
3
36