TRENDnet TEG-S2600I User Manual page 78

Create 802.1Q VLAN
Create an 802.1Q VLAN and add tagged /untagged member ports to it.
1. Select <Edit>.
2. VLAN Name: Type a name for the new VLAN.
3. VLAN ID: Type a VID (between 1~4094). The default is 1. There are 256 VLAN groups to
provided configure.
4. Protocol VLAN: Press Space key to choose protocols type.
5. Member: Press Space key to choose VLAN member. There are three types to selected:
a. UnTagged：This port is the member port of this VLAN group and outgoing frames are NO
VLAN-Tagged frames.
b. Tagged：This port is the member port of this VLAN group and outgoing frames are
VLAN-Tagged frames.
c. NO：The port is NOT member of this VLAN group.
6. Press Ctrl+A go back action menu line.
7. Select <Save> to save all configure value.
NOTE: If the trunk groups exist, you can see it (ex: TRK1, TRK2...) after port 26, and you can
configure it is the member of the VLAN or not.
- 78 -