TRENDnet TEG-S2600I User Manual page 27

0: disable rate control.
1 ~ 1000: valid rate value.
7. Port Priority: Enable or disable the port priority function. There are two priorities (high or low)
provided if port priority is enabled.
8. Port Security: A port in security mode will be "locked" without permission of address learning. Only
the incoming packets with SMAC already existing in the address table can be forwarded normally.
User can disable the port from learning any new MAC addresses, then use the static MAC addresses
screen to define a list of MAC addresses that can use the secure port. Enter the settings, then click
Apply button to change on this page.
- 27 -