Canon Color imageCLASS MF8050Cn Starter Manual page 14

2.
Set the fax receive mode.
You can specify how the machine should operate for a fax call or telephone call.
By answering the questions that appear on the display, the machine is set to any one of the following four* operation
modes.
<Auto><Fax/Tel><Answer><Manual>
* You can set a receive mode other than the above manually depending on your country or region. For details on the setting procedure, see "Receiving Faxes" in the e-Manual.
Do you want to use
this machine for fax
only (no telephone)?
<Yes>
<No>
Do you want to auto-
receive faxes and
answer phone manually?
<Yes>
<No>
Do you want to use
an answering machine
to answer the phone?
<Yes>
<No>
The <Manual> mode is set.
→ Proceed to Step 3.
• Responds both a telephone call and fax by
picking up the handset.
• Rings when receiving a call or fax.
12
The <Auto> mode is set.
→ Proceed to Step 3.
• Receives a fax automatically.
• Does not use the telephone.*
* If connecting with the telephone in the auto receive mode, the
telephone rings when receiving a fax or telephone call. You can answer
the telephone while the telephone is ringing. To configure so that the
telephone does not ring, see "Incoming Ring" in the
The <Fax/Tel> mode is set.
→ Proceed to Step 3.
• Receives a fax automatically.
• Responds a telephone call by picking up the handset.
The <Answer> mode is set.
→ Proceed to Step 3.
• Receives a fax automatically.
• Responds a telephone call by built-in answering machine.
• Rings when receiving a call or fax.
e-Manual.