Cleaning - Brother PE-180D User Manual

CLEANING

2
58
Always keep the machine clean.
1. Turn off the power, remove the needle, and then raise the
presser foot lever.
1 Use a screwdriver to loosen the screw to remove.
2. Loosen the screws on the needle plate.
3. Remove the needle plate.
3
4. Take out the inner rotary hook.
5. Remove any accumulated lint and threads from the inner
hook and race with a brush or a small vacuum cleaner
attachment.
1 Race
2 Inner rotary hook
5
* Lint and dust accumulated in the race can cause poor
quality stitching.
4
O
6. Put the inner rotary hook back in position by placing the
projection of the hook next to spring of the stopper.
1 Projection of the hook
2 Spring of the stopper