Chapter 3 Appendix; Care And Maintenance Of The Machine; Cleaning The Machine Surface; Restrictions On Oiling - Brother SKiTCH 888-R00 Operation Manual

Embroidery machine
Table of Contents

Advertisement

Care and Maintenance of the Machine

3 APPENDIX
Chapter
Care and Maintenance of the Machine
CAUTION
• Unplug the power cord before cleaning the machine,
otherwise injuries may occur.

Cleaning the machine surface

When wiping dirt off the machine, firmly wring a soft cloth
soaked in (lukewarm) water.
After cleaning the machine, dry it with a soft, dry cloth.

Restrictions on oiling

In order to prevent damaging this machine, it must not be
oiled by the user.
This machine was manufactured with the necessary amount
of oil applied to ensure correct operation, making periodic
oiling unnecessary.
If problems occur, such as difficulty turning the handwheel or
an unusual noise, immediately stop using the machine, and
contact your authorized Brother dealer or the nearest Brother
authorized service center.
30
Precautions on using and storing the
machine
Do not use or store the machine in any of the locations
described below, otherwise damage or malfunction to the
machine may result, for example, rust caused by
condensation.
• Exposed to extremely high temperatures
• Exposed to extremely low temperatures
• Exposed to extreme temperature changes
• Exposed to high humidity or steam
• Near a flame, heater or air conditioner
• Outdoors or exposed to strong light such as direct sunlight
or spot lighting
• Exposed to extremely dusty or oily environments
In order to extend the life of this machine, periodically
turn it on and use it. Storing this machine for an
extended period of time without using it may reduce its
efficiency.

Advertisement

Table of Contents
loading

Table of Contents