Adjusting The Lcd Screen Contrast; If The Lcd Is Hard To See When The Power Is Turned On - Brother PE-180D User Manual

ADJUSTING THE LCD SCREEN CONTRAST

To adjust the brightness of the LCD screen
1
1 "BASIC OPERATION" key
1

If the LCD is hard to see when the power is turned on

24
2 1
To adjust the contrast of the LCD screen
1 "Dull" Touch this key to make contrast less
2 "Sharp" Touch this key to make contrast
3 Touch "END" to return to the screen which
2 3
*
1. While touching the LCD (anywhere is OK),
2. Touch any one of the lower two selection keys
3. After you have finished adjusting, turn the
1. Press "BASIC OPERATION".
2. Touch "NEXT", "BRIGHTNESS
OF LCD" and "NEXT".
(lighter).
greater (darker).
was previously being displayed.
If the contrast is adjusted too far, the display
screen becomes invisible. Reset it by turning
the power switch off and then on again.
turn the power off and then back on again.
(BASIC OPERATION, MODIFY & ADVISE).
The LCD will become darker each time one of
these keys is touched. If you would like to
make the LCD lighter, touch the upper
selection key (CHARACTERS & DESIGNS).
power off and back on again once more.