Volume Settings; Ring Volume; Beeper Volume; Speaker Volume - Brother MFC-465CN User Manual

Volume Settings

Ring Volume

You can choose a range of ring volume
levels, from High to Off.
While in Fax mode
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.You can also change the volume
through the menu, by following the
instructions below:
Setting the Ring Volume from the
menu
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Ring.
Press OK.
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.

Beeper Volume

When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press Menu.
3
3
, press d or c
3
3
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Beeper.
Press OK.
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.

Speaker Volume

You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Speaker.
Press OK.
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a
Press Hook.
b
Press d or c
This setting will stay until you change it
again.
c
Press Hook.
General setup
3
.
23
3