Loading Photo Paper - Brother MFC-465CN User Manual

How to load envelopes and post cards
a
Before loading, press the corners and
sides of the envelopes or post cards to
make them as flat as possible.
Note
If the envelopes or post cards are 'double-
feeding', put one envelope or post card in
the paper tray at a time.
b
Put the envelopes or post cards into the
paper tray with the address side down
and the leading edge in first as shown in
the illustration. Slide the paper side
guides (1) and paper length guide (2) to
fit the size of the envelopes or post
cards.
2
If you have problems when printing on
2
envelopes, try the following suggestions:
a
Open the envelope flap.
b
Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
c
Adjust the size and margin in your
application.

Loading photo paper

Note
In Canada, the photo bypass tray is
called the photo paper tray.
Use the photo bypass tray, which has been
assembled on the top of the output paper tray
cover, to print on photo 4"×6" and photo L
3.5"×5" size paper. When you use the photo
bypass tray, you do not have to take out the
paper that is in the tray beneath it.
1
Loading documents and paper
2
2
2
17