Duo Phones Service; Creating Pauses And Waits While Dialing; Making International Calls - Motorola M710 - SOUTHERNLINC Manual

Duo Phones Service

Note: This service is subjected to subscription with
your service provider.
The duo phones service is based on the installation of the
M710 In-Vehicle Phone to your mobile cellular phone, both
connected to the same service provider, and using the
same subscription.
When you receive a call, both phones will ring up to 6
times. Answering the call with either of them, will cause the
other phone to stop ringing.
If the call was not answered by both phones, it will be
transferred to the VoiceMail of the mobile phone.
Creating Pauses and Waits While
Dialing
You can enter a pause or wait while dialing a number.
For information on using pauses and waits, see "Creating
Pauses and Waits" on page 38.
To create a pause while dialing a phone number:
1 From the keypad, enter the digits you want to occur
before the pause.
m
2 Press
.
46
3 Select Insert Pause.
4 Enter the digits you want to occur after the pause.
To create a wait while dialing a phone number:
1 From the keypad, enter the digits you want to occur
before the wait.
m
2 Press
.
3 Select Insert Wait.
4 Enter the digits you want to occur after the wait.

Making International Calls

Note: This feature may not be offered by your service
provider.
Plus Dialing lets you place an international call to most
countries without entering the local international access
code.
0
1 Press and hold
for two seconds. A "0" appears, then
changes to a "+".
Note: The network translates the "+" into the
appropriate international access code needed
to place the call.
2 Enter the country code, city code or area code, and
phone number.