Enabling Over-The-Air Security - Motorola M710 - SOUTHERNLINC Manual

When You Power On For the First Time
If the Enter SIM PIN Code screen appears, enter your SIM
PIN. See "Entering the PIN" on page 9.
A
under Ok.
Press
When you receive your phone, the SIM PIN is 0000. Change
your PIN to prevent fraudulent use of the SIM card (see
"Changing the PIN" on page 9).
As your phone connects to the network, you will see a
welcome message and a connecting message. When the
idle screen appears, the phone is ready to use.
Ignition Sensor Powering
Your M710 phone powering is controlled by an ignition
sensor, that will:
• Automatically power on the phone after the car is started.
• When not engaged in an active call, the phone will
automatically power off after the car is turned off.
• When turning the car off while engaged in an active
call, the phone remains active and turns itself off
automatically 6 seconds after ending the call.
For more information, see in the phone's installation guide.

Enabling Over-the-Air Security

If you are set up to receive over-the-air programming from
your service provider, you must enable security the first
time you power on your phone or within 10 days of first
activation of your phone:
1 When you power on your phone for the first time, after
the idle screen appears, you will be prompted to select
Ok to update your browser information.
A
Note: If you press under Later, you will be
prompted to enable security each time you
power on your phone until you press
Ok.
Getting Started
A
under
3