Exiting Mototalk; Talk Range; Channels And Codes - Motorola M710 - SOUTHERNLINC Manual

Exiting MOTOtalk

To switch to network mode:
1 From the MOTOtalk idle screen, press
2 Scroll to MT Options and press
3 Select Exit MOTOtalk.
Tip: You can also exit MOTOtalk from the MOTOtalk
idle screen by pressing e for 3 seconds.
Switching to Network Please Wait displays. After a
few seconds, the network idle screen appears.

Talk Range

While in MOTOtalk mode, phones should be a minimum
of 6 feet apart to maximize performance and improve
transmission range.

Channels and Codes

Your phone has 10 channels and 15 codes. Channels are
divided into sets of frequencies. Other parties may be
talking on the same channel. Codes minimize interference
from other parties when you are sharing the same channel.
m
.
o
.
MOTOtalk opens to the last code and channel used on your
phone. You can view the code and channel your phone is
currently set to on the MOTOtalk idle screen.
For code calls, all parties must be on the same channel
and code. For private MOTOtalk calls, the person you are
calling must be in MOTOtalk and set to the same channel
to receive your call.
Note: When making a code call, all parties that are
on your code and channel can hear your
conversation.
Setting Channels and Codes
To set a channel:
1 From the MOTOtalk idle screen, press
2 Scroll to Channel.
A
3 Press under Edit.
4 Select a channel.
5 When you are finished, press
the MOTOtalk idle screen.
MOTOtalk™
A
under Edit.
A
under Back to return to
19