Checking Capacity; Creating Pauses And Waits - Motorola M710 - SOUTHERNLINC Manual

4 Select Delete Number.
o A
5 Press under Yes to confirm.
or press
Note: If an entry contains only one number or
address, deleting the number or address
deletes the entry.

Checking Capacity

To see how many numbers are stored in Contacts:
1 From the Contacts list, press
2 Select Capacity.

Creating Pauses and Waits

When storing a number, you can program your phone to
pause or wait between digits while dialing. A pause makes
your phone pause for 3 seconds before dialing further.
A wait makes your phone wait for your response before
dialing further.
This feature is useful when using voice mail or other
automated phone systems that require you to dial a phone
number and then enter an access number.
38
m
.
To program a pause:
*
Press and hold until the letter P appears. The P
represents a 3-second pause.
If you store 17035551235P1234, when you select this
number and make a call, your phone dials the first 11 digits,
pauses for 3 seconds, then dials the last 4 digits.
If you want a pause longer than 3 seconds, press and hold
*
more than once. Each P represents a 3-second pause.
To program a wait:
*
Press and hold until the letter W appears. The W
means your phone waits before dialing further.
If you store 17035551235W1234, when you select this
number and make a call, your phone dials the first 11 digits
and then waits. A message appears asking if you want to
send the rest of the digits. Press
4 digits.
Tip: You can create pauses and waits while dialing a
number from the keypad. See "Creating Pauses
and Waits While Dialing" on page 46.
A
under Yes to dial the last