Platform; Bracing Pin; Mounting Assembly - Bose Wave music system Supplementary Manual

Arabic S. Chin
U -
NDER CABINET INSTALLATION
Figure 6
Under-cabinet bracket
assembly
Securing your Wave
Figure 7
®
Securing your Wave
music system to the
bracket
6
Korean Thai Nederlands
Finalizing the under-cabinet assembly
You are now ready to assemble the bracket, using one of the two assembly screws:
1. On the top of the platform, fit the mounting assembly alignment pin into the rear of the
three holes (Figure 6).
2. From under the platform, insert the screw through the middle hole on the platform !
and into the mounting assembly bar above the platform. Tighten the screw to hold the
platform securely in place.

Mounting assembly

Alignment pin
Assembly screw
Middle hole
product to the bracket
®
With the bracket securely mounted, be sure to add the bracing pin, as instructed below, for
increased stability when you place your Wave
CAUTION: Be sure to insert the pin only in the bracket platform hole that is appropriate for the
®
Wave music system and Wave
1. Press the two halves of the pin together and fit them through the proper hole on the !
platform (Figure 7). The pin snaps into place.
2. Lower your Wave ® system onto the platform, making sure it engages the pin and that the
back feet of the Wave
®
Wave music system
Italiano Français

Platform

®
system on the platform.
®
radio II.
®
system rest securely inside the foot pads on the platform.

Bracing pin

Español Deutsch
Hole on the bottom of the
music system !
®
Wave
®
or Wave radio II
Platform hole to use with the !
music system !
®
Wave
®
or Wave radio II
English