Figure 3 - Bose Wave music system Supplementary Manual

Arabic S. Chin
B
RACKET INSTALLATION
Deciding where to mount the bracket

Figure 3

Bracket used for a) under-
cabinet or b) wall mounting
4
Korean Thai Nederlands
Before using your drill
Before you begin to drill, center the tip of the drill bit in each drill
hole circle you draw.
WARNING: Use eye protection and be sure to
observe all safety precautions while using a drill or
cutting tool.
WARNING: Make sure the spot chosen is safe for
cutting. Do not cut through surfaces that may have
hazards such as electrical wiring, conduits, or plumb-
ing concealed behind them. Follow all other safety
precautions.
Before you assemble the bracket by attaching the platform to the mounting assembly, !
decide which type of mounting you prefer. Choose wall mounting to allow for the height
required by a Wave ® music system on a Multi-CD Changer or a Wave
products do not fit in an under-cabinet installation.
Also consider:
• Convenience.
• Distance to an electrical outlet.
• Appearance of your Wave
• Access to system features, like the CD player, as needed.
a)
Under-cabinet
mounting
For under-cabinet mounting, follow
instructions for "Under-cabinet
installation" on page 5.
Italiano Français
®
system in this location (Figure 3).
b)
Wall
mounting
For wall mounting, follow
instructions for "Mounting
the bracket on a wall" on
page 7.
Español Deutsch English
radio/CD. These !
®