Settings Description - Bushnell Imageview 11-1025 Instruction Manual

Using the Operational Modes
Mode Icon
Video Video
Camera
Quality Hq or Lq
Resolution Hi or Lo
Settings Description
OFF, High Select "Hi" (recommended) or "Lo" video
(640x480 resolution instead of "OFF" to put the camera in
pixels per video mode. Wait a few seconds for the camera to
frame, 29 fps), automatically return to the normal display, then
Low (320x240 begin shooting by pressing SNAP. the counter
pixels) will show the elapsed time while recording the
video clip. Press SNAP again to stop shooting. the
counter will advance by one, indicating the video
file has been saved. Return to the video mode
setting and select OFF to reset the camera to still
photo mode.
High, Low Select "Hi" (recommended) or "Lo" quality to
choose the amount of file compression, which
affects the size of the photo file. "Lo" allows more
photos to be stored in memory, but at reduced
quality.
High (2.0MP*), Select "Hi" or "Lo" resolution, based on your
Low (1.3 MP)
preference for more detailed photos (Hi) or being
*via software able to take a greater number of photos (Lo).
interpolation
8
(Bold indicates default settings)