Fagor FIC-381E Installation And User Manual page 44

REVERSIBILITY OF THE DOORS
If the direction in which the doors open needs to be
S
changed, carry out the following:
- Remove the axle lid R from the upper and lower
hinges.
- Also remove the corresponding caps in the upper
T
and lower areas of the door and replace them with the
bushes included in the kit accompanying the appli-
ance.
- Close the appliance door, unscrew the side screws S
which are blocking the axles T and slide these towards
S
the inside of their hinges, paying attention when
attaching them.
- Reposition the plastic regulating washers, paying
R
attention to the amounts in each position.
- Remove the side screws which support the axle
hinges making them slide towards the inside of the
previously assembled door bushes, remembering to
Fig. 3
position the regulating washers and secure the axles.
Note:
The accessories are included in a kit bag inside the
vegetable drawers.
REVERSIBILITY OF THE FREEZER AREA DOOR
(On models which require this)
- Disassemble the door catch Y, the hinge support X and remove the door.
- Remove the 4 caps covering the holes (2 to the right
and 2 to the left).
- Attach the door catch Y on the opposite side of the
appliance.
- Turn and position the door with the handle facing the
other side.
Y
- Turn and assemble the hinge support X on the other
X
side.
- Cover the holes using the 4 lids which were removed
previously.
Fig. 4
44