American Dynamics EDVR Installation And Operation Manual page 15

22. Right button ("")
While in the setup menu mode, press to highlight the desired item.
In both the live and play modes, press this button three times successively to get three multi-channel modes
on the main monitor, the first two times in a 3-way view, and the last in a 4-way mode.
23. Jog Dial
The jog dial can be turned clockwise or counterclockwise, as well as step-by-step. Turn the jog dial
counterclockwise (to the left) to play a recorded video in the reverse direction. Turn it clockwise (to the right)
to play a recorded video in the forward direction. Moreover, the dial can be rotated so you can move the
focus to any display item or function.
24. Shuttle Ring
The shuttle ring can be turned clockwise or counterclockwise so that the playback is displayed in either a
forward or backward direction. Turn the shuttle ring counterclockwise (to the left) to play a recorded video in
the reverse direction at faster or slower speeds than the recorded speed. Turn it clockwise (to the right) to
play a recorded video in the forward direction at faster or slower speeds than the recorded speed.
Additionally, the shuttle ring can also be rotated to change or adjust values in your settings.
Note: The monitor will display the message Stop Record if you turn off the device while recording.

25. Lock Indicator
Denotes an operation lock. The amber indicator is illuminated during a lock condition.
26. Timed Recording Indicator (clock icon)
When illuminated, indicates that a scheduled record setting is on ("clock" icon = timer record).
27. Disk Indicator
Indicates the status of the unit's hard disk drives. The green light indicates a hard disk drive is storing or
retrieving data. The red light signals that a hard disk drive is filling up. The orange light indicates the hard
disk is retrieving at disk-full status.
28. Power / Reboot button
Press this recessed button (using a tool such as the point of a ballpoint pen) quickly (briefly) to turn the
EDVR power on or off. Press this button for at least 3 seconds to restart the EDVR (such as when updating
the system files. See the appendix "System Software Update," page 103).
Product Description
5