Specifications - Aiwa Z-HT63 Operating Instructions Manual

Main unit CX-ZHT63
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
87.5 MHz
tO
108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (1O kHz
step)
531 kHz to 1602 kHz (9 kHz
step)
350 ~V/m
Loop antenna
Front
50 W+50 W (50 Hz-20 kHz, THD
lessthan 1 %, 6
ohms)
Rear (Surround)
20 W+20 W(5O Hz-20 kHz, THD
less than 1 %, 8 ohms)
Center
20 W (50 Hz -20 kHz, THD less
than 1
Y.,
8 ohms)
Front
0.15 % (25 W, 1 kHz, 6 c)hms,DIN
AUDIO)
Rear (Surround)
0.15 O/.(10 W, 1 kHz, 8 ohms)
Center
0.1 % (1OW, 1 kHz, 8 ohms)
VIDEO/AUX: 310 mV
(adjustable)
PHONO: 400 mV (47 kohms)
5.1CH INPUT
FRONT 500 mV
SURROUND: 300 mV
CENTER: 300 mV
SUB WOOFER: 500 mV
MIC 1, MIC 2: 1.4 mV (20
kohms)
CD DIGITAL OUT (OPTICAL)
SUB WOOFER: 1 V
SPEAKERS: accept speakers
of 6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8-16 ohms
or more
CENTER SPEAKER: accepts
speakers of 8 ohms or more
PHONES (stereo jack):
accepts headphones cjf 32
ohms or more
4 tracks, 2 channels stereo
CrOz tape: 50 Hz – 16000 Hz
Normal tape: 50 Hz – 15000
Hz
50 dB (CrOz tape peak level,
above 400 Hz)
AC bias
Deck 1: Playback head x 1
Deck 2: Recording/pli~yback/
erase head x 1
Compact disc player section
Laser Semiconductor laser (k= 780
nm)
D-A converter 1 bit dual
Signal-to-noise ratio 85 dB (1 kHz, O dB)
Harmonic distortion 0.03 %(1 kHz, O dB)
Wow and flutter Unmeasurable
General
Power requirements 120 VAC, 60
Hz
Power consumption
130W
Dimensions of main unit 360 x 394.5x 387.5 mm
(W XHXD)
(141/4 x 155/8x 1.53/8 in.)
Weight of main unit
10 kg (22 lb. 1
02)
Speaker system SX-ZHT65
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
3 way, bass reflex
Woofer:
220 mm cone type
Tweeter:
60 mm cone type
Super tweeter:
20 mm ceramic type
6 ohms
89 dB/W/m
290 x 444 x 306 mm
(111/2 X 193/4X lzl/8 h.)
6.3 kg (13 lb. 14
OZ.)
Specifications and external appearance are subject to change
without notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
LME.SYSTEM
The word "BBE" and the "BBE symbol" are trademarks of BBE
Sound, Inc.
Under license from BBE sound, Inc.
DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
"DOLBY, the double-D symbol U and "PRO LOGIC" are
trademarks of Dolby Laboratories Licensing Corporation.
NOTE
This equipment has beerr tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit dif'ierent from
that to which the receiver is connected.
-
COW.Ilt
the dealer or an experienced radiomv technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
ENGLISH
33