Aiwa Z-HT63 Operating Instructions Manual page 16

Press CD, then press AOPEN/CLOSE to open the
disc compartment. Load disc(s) with the label side
up.
To load one or two dis CS,place the disc(s) on the tray(s) in the
direction of the arrows as illustrated.
HANGE
Tray
num
To load three to five discs, press DISC CHANGE to rotate the
trays after placing two discs. Place the next disc on empty tray.
Each time DISC CHANGE is pressed, the trays rotate and one
disc can be placed.
After placing the discs, press AOPEN/CLOSE to close the
disc compartment.
The display shows the information of the disc to be played.
Tray number of the
disc to be played
Total playing time
Total number of tracks
CD EDITI
CHECK
0-9,+1
o
DISC
DIRECT
PLAY
4b
+,*
Load discs.
To dav all discs in the disc com~artment, press +>.
All discs are played once.
The indicator of DISC DIRECT PLAY flashes to indicate the disc
being played.
Number of track
being played
Elapsed playing time
To tiav one disc only, press DISC DIRECT PLAY
The disc with the selected tray number is played once.
1-5.
Only the
indicator of the selected
DISC DIRECT PLAY flashes.
Selected disc t[ay number
Elapsed playing time
Number of track being played
To play with the remote control
Press DISC DIRECT PLAY, then press one of the numbered
buttons 1-5 within 3 seconds to select a disc.
To stop play, press .
To pause play, press 1[. To resume play, press again.
To search for a particular point during playback, keep 4+
or w pressed and release the button at the desired point.
To skip to the beginning of a track during playback, turn
MULTI JOG or press - or _ repeatedly.
To remove discs, press AOPEN/CLOSE.
You can onlv remove the two discs that face VOU.When the
disc(s) to be removed does(do) not face you, press DISC
CHANGE repeatedly.
16
ENGLISH