Aiwa Z-HT63 Operating Instructions Manual page 9

,.,
8..;,,"- .' -..,? t
BBE SYSTEM
E
VOLUME CONTIROL
Turn VOLUME om the main unit, or press VC)L A
m' V on the remote control.
The volume level is displayed as a number from Oto MAX (50).
"rhe volume level is automatically set to 20 when the power is
turned ofl with the volume level set to 21 or more.
To chamge the left/right balance
Press MANUAL SELECT on the remote control. L/R is displayed
for 2 seconds. Press <H or > on the remote control within
lhese 2 seconds.
I The DOLBY PRO LOGIC (page 23) and the DOLBY DIGITAL
SURROIJND (page 31) front speakers level is also changed.
UJsing the headphones
Connect headphones to PHONES jack with a stereo standard
plug (06.:~ mm, '/4 inch;).
No sound is output from the speakers while the headphones are
plugged in.
,, When the headphone are plugged in, the DSP SURROUND
system (page 11), the DOLBY PRO LOGIC (page 23) and the
5.1 CH (page 31) do not function.
Sound adjustment during recording
"rhe
output volume and
tone (except BBE) of the speakers or
Iheadphones can be freely varied without affecting the recording.
@
The BBE system enhances the clarity of high-frequency sound.
F
It also enriches the Karaoke function to make your voice sound
clear and pleasant,
$!
'*:
Press BBE.
,@
.W%
Each time it is pressed, the level changes. Select one of the ~
three levels or the off position to suit your preference.
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels or the off position to suit your preference.
Kmz3
When playing back a tape recorded with BBE, it is recommended
that BBE be set to off to avoid distorted high frequency sound.
ENGLISH
9