Aiwa XR-MD90 Operating Instructions Manual page 15

+ Nothing other than an MD should be inserted in the disc drive,
otherwise the disc may become scratched, causing a
malfunction or a safety hazard such as an electric shock.
Do inot attempt to insert another MD while a disc is already
inside the drive. While a disc is already inserted inside with
the power off, the inner circle of the eye catcher is displayed.
o Do not tilt the unit with a disc inserted. Doing so may cause
malfunctions.
SHIFT
I
>MD PLAY
RAINDOM PLAY
All the tracks on the disc can be played randomly.
Press the RANDOM button while pressing the SHIFT
button on the remote control.
"RANDOM" lights up on the display.
To cancel random play, repeat the above.
o Even if the 44 button is pressed, a previously played track
cannot be skipped. The unit returns to the beginning of the
current track only.
When you select a track with the numbered buttons on the
remote control during the random play mode, the selected track
starts to play and the random play mode is canceled.
REIPEAT PLAY
A single track or all tracks can be played back repeatedly.
While pressing the SHIFT button, press the REPEAT
butlon repeatedly on the remote control.
"%1" lights up when single track repeat play is selected, and
"~" lights up when all tracks repeat play is selected.
To cancel repeat play, repeat the above.
To
repeat random play
First activate the random play mode by pressing the RANDOM
buttcn while pressing the SHIFT button on the remote control.
Then press the REPEAT button while pressing the SHIFT button
so that "~" lights up.
PROGRAMMED
PLAY
Up to 30 tracks can be programmed from the inserted disc.
Use the remote control.
1
2
3
4
Press the PRGM button while pressing the SHIFT
button in stop mode.
"PRGM" appears on the display.
Press the numbered buttons and the +10 button
to program a track.
Example:
To select the 12th track, press the +1 O and 2 buttons.
To select the 20th track, press the +1 O, +1 O and O buttons.
Selected track number
Program number
Total number of Total playing time of the
selected tracks
selected tracks
Repeat step 2 to program other tracks.
Press the - MD PLAY button to start play.
To
check the program
Each time the * button is pressed in stop mode, a track
number and program number will be displayed.
To clear the program
Press the button in stop mode.
To add tracks to the program
Before playing, repeat step 2. The track will be programmed
after the last track.
To
change the programmed tracks
Clear the program and repeat all the steps again.
m
During programmed play, the REMAIN, RANDOM, and
numbered buttons do not function.
ENGLISH ~
5