Aiwa XR-MD90 Operating Instructions Manual page 14

OPERATION
'MD
E JEcT~
I
.—
d'+
~+o
1
REMAIN
hMD PLAY
DISPLAY
II
U,*E
L
I
,
-. __,,
—.—-
MD
/
INSERTING AN MD
Insert a disc into the disc drive completely with the
label
side up and in the direction of the arrow.
"TOC READING" appears on the display while the unit reads
the data of the inserted disc.
Direction guide
i
PLAYING AN MD
Insert an MD.
Press the - MD PLAY button.
Playback of the loaded MD begins immediately, regardless of
the music source currently being selected.
Eye catcher
Number of track being played
Elapsed playing time
The eye catcher rotates while the disc is being played.
To stop play,
press the H button.
To
pause,
press the II button. To resume play, press it again.
To
search for a particular point during playback,
keep the
44 or > button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback,
press
the 4+ or > button repeatedly. The system skips forward
through the tracks with the - button, and skips back with the
+ button,
To
eject a disc,
press the 4 MD EJECT button.
Do not hold the disc when ejecting the disc.
The disc can be ejected by pressing the A MD EJECT button
even when the unit is turned off.
t ~
Pull the disc out.
Other method to start play
Press the MD button on the control panel, insert a disc, and then
press the b button (or the ~ MD PLAY button).
Display window in stop mode
Music calendar (only the first
16 tracks are displayed)
Total number of tracks Total playing time
Selecting a track with the remote control
Press the numbered buttons and the +1 O button to select a track.
Example:
To select the 25th track, press the +1 O, +1 O and 5 buttons.
To select the 10th track, press the +1 O and O buttons.
The selected track starts to play and play continues to the end
of that disc.
To start play when the power is off (Direct Play
Function)
Press the - MD PLAY button on the front panel. The power is
turned on and play of the inserted disc begins.
To
play a disc at double speed
During play, keep the P button pressed for more than two
seconds.
To resume normal play, press the * button again .
Stopping play also releases the double-speed playback mode.
To check the remaining time
During play, press the REMAIN button while pressing the SHIFT
button on the remote control. To restore the playing time display,
repeat the above.
Note that the remaining time cannot be displayed during random
or programmed play.
To check the track title
During play, press the DISPLAY button, The title of the track
being played is displayed. If the track title is not registered, the
track number is displayed. To restore the playing time display,
press the DISPLAY button again.
To check the disc title
In stop mode, press the DISPLAY button. The title of the disc is
displayed. If the disc title is not registered, "No Title" is displayed.
To restore the total playing time display, press the DISPLAY
button again.
14
ENGLISH