Using the File
System
Software
Configuration Files
The file system is an area on the Management Module that stores:
Software configuration files
The event log
The file system also acts as a temporary storage area for software images
that are downloading through the Management Module to other
modules in the chassis.
Under most conditions, you do not need to access or manage the file
system. The file system supports commands that allow you to view the
files in the file system or to delete certain files.
The following commands are available to display and manage the file
systems, which store software configuration files:
show file
clear file
clear file_system
Displaying Files in the File System
The
command displays files in the file system storage.
show file
Example:
CB9000> show file
Eme flash disk directory contents list:
Current number of files is: 13
Maximum number of files was: 15
FileSize
Date
-------
-----------
170551
Jul 25 1999
71288
Jul 24 1999
71288
Jul 24 1999
82904
Jul 25 1999
82904
Jul 25 1999
82904
Jul 25 1999
82904
Jul 25 1999
82904
Jul 25 1999
82904
Jul 25 1999
82904
Jul 25 1999
82904
Jul 25 1999
Using the File System
Time
FileName
-----
--------
10:27:26
EventLog
10:39:01
BladeConfig.08.01
10:39:10
BladeConfig.09.01
9:49:15
BladeConfig.10.01
9:49:19
BladeConfig.11.01
9:49:23
BladeConfig.16.01
9:49:27
BladeConfig.07.01
9:50:00
BladeConfig.14.01
9:50:04
BladeConfig.13.01
9:50:08
BladeConfig.12.01
9:50:12
BladeConfig.15.01
101